Product Description
Portable Handheld LED Display Digital Breath Alcohol Tester
1. Product name: Digital Breath Alcohol Tester
2. Dimension: 95 x36x18 mm
3. Powered by: 2* AAA battery (it is not included)
4. Warm-up time: Within 10 seconds
5. Respond time: Within 5 seconds
6. Operating temperature range: 5 ~ 40 °C
7. Detection range: 0.00 - -0.19% BAC & 0.0 - -1.9 g / l
8. Accuracy:±0.01% BAC
9. It has timing and countdown function.
Features
1. Digital sound alarm Alcohol Tester
2. Measuring range: 0.00 - -0.19% BAC & 0.0 - -1.9 g / l (or 0.00 - -0.95 mg / l BRAC)
3. Fast response and recovery
4. Automatic shut-down
5. Use two X1.5V alkaline batteries
Preheating
1. Press the power button, the alcohol tester display turns on, and the tester beeps.
2. Alcohol tester display "warm up", also shows the countdown from 10 to 0, alcohol tester is in the warm-up state.
Tips:
When the alcohol tester is used for the first time, or when it is not used for a long time, the alcohol sensor surface may affect the tester performance due to the adsorption of large amounts of gas impurities. Thus affecting the normal work of alcohol tester.
Please clean the alcohol sensor first, and then repeatedly press the power button as many times to preheat the tester.
Test:
1. When warm-up is completed, the tester displays "Blow" and displays a countdown from 10 to 0.
The tester enters the test mode.
2. Blow to the hole of alcohol tester at short distance about 3-5 seconds.
3. Read the test results from the alcohol tester display.
4. "Caution" shows the number of the right side of the measured body alcohol concentration in the following range, indicating that the measured person drinking, driving to be careful.
over & equal 0.05% BAC(or 0.5g/l).
over & equal 0.08% BAC(or 0.8g/l)
Automatic shut-down
1. Test results are displayed about 15 seconds after the LCD display shows "OFF" for about 2-3 seconds, the alcohol tester automatically shuts down
2. If the measured person does not aim at the vent of the alcohol tester, the LCD display will show "0.00".
3. In order to obtain more accurate measurement results, it recommends that you repeatedly check 2 to 3 times. Do not perform a second test within 3 minutes.
Packing details: One piece in a color box
Audited Supplier 
){kind=link}